Anti Slip Mats UK | Rubber & PVC Safety Mats | Free Delivery | Rubberco
2 products
2 products
Description
Anti Slip Mats UK — Rubber & PVC Safety Mats for Every Application | Free Delivery
Anti slip mats UK provide targeted, cost-effective slip prevention in high-risk zones without the need for full floor replacement. From commercial kitchen drainage mats to bathroom safety mats, stair tread mats to industrial drainage flooring — Rubberco supplies anti slip mats for every UK application, with free UK delivery.
What Are Anti Slip Mats?
Anti slip mats are specialist matting products designed to achieve a minimum PTV (Pendulum Test Value) of 36+ in wet conditions — the UK HSE standard for low slip risk surfaces. They achieve this through surface texture (ribs, grids, diamonds, coin patterns), material properties (rubber's inherently high friction), and drainage features (open grids that allow liquid to drain away from the walking surface).
Types of Anti Slip Mats UK
Rubber Anti Slip Mats
The most durable and effective type. Vulcanised rubber achieves PTV 36+ in wet conditions inherently through its surface texture — not surface treatments that wear off. Available in:
- Solid rubber anti-slip mats: Ribbed, diamond or coin-top pattern. General wet area use.
- Open-grid drainage mats: Allows liquid to drain through. For commercial kitchens, industrial wet areas, poolside.
- Anti-fatigue anti-slip mats: Combines slip resistance with ergonomic cushioning for standing workstations.
PVC Anti Slip Mats
Lighter and more flexible than rubber. Good slip resistance in wet conditions. Popular for:
- Bathroom, shower and wet room mats
- Food service under-equipment mats
- Lightweight industrial use
Anti Slip Stair Tread Mats
Purpose-designed rubber mats for stair treads. Features:
- Profiled front edge to fit flush with stair nosing
- Ribbed or grooved anti-slip surface
- Self-adhesive or bolt-down fixing options
- Indoor and outdoor (UV-resistant EPDM) versions
Entrance Anti Slip Mats
Heavy rubber entrance mats that trap dirt and moisture while providing PTV 36+ anti-slip protection. The combination of dirt-trapping capacity and slip resistance makes these the most important mats in any building — wet, grit-contaminated entrances are major slip hazard zones.
Applications by Area
Commercial Kitchens
R11 anti-slip mats or R12 where oil/grease contamination is present. Open-grid drainage mats at cooking stations, wash areas and prep areas. Anti-fatigue anti-slip combination mats at stand-up prep stations reduce both slip risk and worker fatigue.
Bathrooms and Wet Rooms
R10 rubber anti-slip mats or PVC open-grid shower mats. Non-slip bath mats with suction cup backing for domestic use. Purpose-designed shower tray mats for wet room shower areas.
Industrial and Warehouse
R11-R12 anti-slip drainage mats for wet industrial floors. Anti-fatigue anti-slip mats at standing workstations. Chemical-resistant rubber for processing areas with aggressive cleaning chemicals.
Entrances and Lobbies
Heavy rubber anti-slip entrance mats combining dirt trapping and PTV 36+ slip resistance. Particularly important in UK buildings where wet winter weather creates constant slip risk at entrances.
Staircases and Ramps
Rubber stair tread anti-slip mats for indoor and outdoor stairs. Continuous rubber strip mats for ramps. High-contrast edge marking for visually impaired users (BS 8300 guidance).
Vehicle Steps and Loading Areas
Heavy-duty rubber anti-slip mats for HGV and PSV steps, loading platforms and loading bay floors. Must withstand outdoor exposure, oil contamination and heavy point loads.
Buying Guide: What to Look For
- PTV or R-rating certification: Always ask for slip resistance test evidence. PTV 36+ (wet) = low risk.
- Chemical resistance: Match rubber compound to your cleaning products
- Drainage: Open-grid design for areas with liquid pooling
- Thickness: 6-10mm for light use, 15-20mm for heavy industrial
- Anti-fatigue: Look for combined anti-slip/anti-fatigue for standing work areas
Related Products
FAQs
What are anti slip mats used for?
Targeted slip prevention in wet areas, kitchens, bathrooms, industrial floors, staircases and entrances. Achieve PTV 36+ in wet conditions.
Best anti slip mats for commercial kitchens UK?
R11 rubber with open-grid drainage for cooking and wash areas. Anti-fatigue anti-slip combination mats at prep stations.
Are anti slip mats required by law?
Workplace Regulations 1992 require slip-free floors. Anti slip matting is a recognised compliance method where full floor replacement isn't feasible.
Best anti slip mat for stairs UK?
Profiled rubber stair tread mats with ribbed surface. UV-resistant EPDM for outdoor stairs. Self-adhesive or bolt-down fixing.
Related Categories
- Rubber Matting UK — heavy-duty rolls & sheets, cut to size
- Gym Flooring UK — rubber tiles, rolls & mats for gyms
- Rubber Sheeting UK — SBR, EPDM & nitrile sheet
- Anti-Fatigue Mats UK — ergonomic standing mats
2026 Buying Guide: How to Choose Anti Slip Mats UK
Updated for May 2026, this guide reflects current HSE guidance and new product developments.
Identify the Slip Risk Level
- Low risk (R9/PTV 36–44): Dry indoor offices — standard rubber mats sufficient
- Medium risk (R10/PTV 44–55): Wet bathrooms, domestic kitchens, light industrial with occasional liquid
- High risk (R11/PTV 55–65): Commercial kitchens, pool surrounds, food processing areas
- Very high risk (R12/PTV 65+): Industrial areas with oil or grease — open-grid nitrile drainage mats required
Choose the Right Mat Format
| Format | Best For | Not Suitable For |
|---|---|---|
| Solid rubber mat (ribbed/coin) | Wet rooms, wet floors, entrances | Oil/grease contamination (R11+) |
| Open-grid drainage mat | Commercial kitchens, poolside, industrial wet | Light domestic use (overkill) |
| Anti-fatigue anti-slip mat | Standing workstations in wet/dry environments | Outdoor permanent installation |
| Stair tread mat | Staircase nosings and treads | Flat floor areas |
HSE Compliance Check
For workplaces governed by the Workplace (Health, Safety and Welfare) Regulations 1992, any anti-slip mat used as a permanent control measure should have documented PTV test data. Our rubber anti-slip mats achieve PTV 36+ (low slip risk) in wet conditions — test data available on request for procurement and risk assessment documentation.
Are anti-slip mats effective on all floor types?
Rubber anti-slip mats grip most hard floor surfaces effectively — concrete, ceramic tiles, vinyl, and most laminates. They can slide on polished marble or highly polished stone if the mat's backing has insufficient friction. For highly polished floors, specify mats with suction-cup or grip-strip backing rather than smooth rubber bases.
How long do rubber anti-slip mats last?
Quality vulcanised rubber anti-slip mats last 5–15 years in commercial use and longer in domestic settings. The anti-slip properties are inherent in the rubber compound and do not wear off like surface coatings. Replace mats when they show cracking, delamination, or when surface texture is worn smooth enough to compromise grip. See our mat maintenance guide for care advice.
Anti-Slip Mat Standards and Ratings — What UK Buyers Need to Know
Choosing anti-slip mats in the UK requires understanding the rating systems used to specify and certify slip resistance. There are two dominant systems for rubber matting:
Pendulum Test Value (PTV) — The UK HSE Standard
The Pendulum Test Value is the UK's primary slip resistance measurement for flooring, mandated by HSE guidance document HSG156. The classification thresholds are:
| PTV (Wet) | Risk Classification | HSE Status |
|---|---|---|
| <25 | High slip risk | Not acceptable in commercial use |
| 25-35 | Moderate slip risk | Marginal — generally not acceptable |
| 36+ | Low slip risk | HSE minimum for wet commercial areas |
| 55+ | Extremely low slip risk | Exceeds all standard requirements |
All rubber anti-slip mats from Rubberco achieve PTV 36+ in wet conditions. Studded and ribbed profiles typically achieve PTV 50-65 wet.
R-Rating (DIN 51130) — German Industrial Standard
Widely used in UK industrial and commercial specifications, the DIN 51130 R-rating classifies floor surfaces based on the angle at which a person slides when walking on an oil-contaminated surface:
| R-Rating | Test Angle | Typical Application |
|---|---|---|
| R9 | 6-10° | Dry areas only — offices, retail (dry) |
| R10 | 10-19° | Moderate wet — entrances, kitchens (low-oil) |
| R11 | 19-27° | Wet commercial and industrial — workshops, washrooms |
| R12 | 27-35° | High-contamination — industrial kitchens, engineering |
| R13 | >35° | Extreme contamination — specialist applications |
For most UK commercial and industrial applications, R11 is the minimum recommended specification. Commercial kitchens and heavy engineering environments should specify R12.
Types of Anti-Slip Mats UK — Complete Range Guide
Ribbed Anti-Slip Rubber Mats
The most common anti-slip mat for commercial UK use. Fine or wide parallel ribs provide directional grip and channel surface water away from the walking surface. Ribbed mats achieve R11 slip resistance in wet conditions and PTV 50+ against the Pendulum Test. Ideal for entrances, corridors, ramps, and general walkway applications where foot traffic moves in a consistent direction along the ribbing.
Studded Anti-Slip Rubber Mats
Raised stud pattern provides multi-directional grip — unlike ribbed mats, studded surfaces resist slipping from any direction of movement. R11-R12 rating in wet conditions. The preferred specification for industrial outdoor areas, loading bays, and applications with multi-directional traffic or wheeled equipment. Studded profiles also provide excellent drainage around the stud bases.
Open-Grid / Drainage Anti-Slip Mats
Anti-slip mats with an open-grid construction allowing water, oil, and cleaning solutions to drain freely through the mat surface. The grid structure keeps feet and footwear elevated above standing liquid — particularly important in commercial kitchens, wash bays, food processing, and wet industrial environments. Open-grid mats achieve R12 and PTV 60+ wet, making them appropriate for the most demanding wet slip-risk environments in the UK.
Anti-Fatigue Anti-Slip Combination Mats
Ergonomically designed mats that simultaneously provide anti-slip certification (PTV 36+, R11) and anti-fatigue cushioning (30-50% fatigue reduction per HSE guidance). The best specification for standing workstations in commercial kitchens, production lines, and customer service positions where workers stand for extended periods on slip-risk surfaces. These mats address two distinct compliance requirements in a single product.
Outdoor Anti-Slip Mats (EPDM)
EPDM rubber anti-slip mats engineered for permanent UK outdoor exposure. UV-stabilised, frost-resistant, and non-porous — maintaining R11-R12 slip resistance throughout all UK weather conditions. Critical for building entrances, disabled access ramps, outdoor steps, and any external area where wet footwear creates slip risk. Service life: 15-20 years outdoor.
Self-Adhesive Anti-Slip Mats and Strips
Thin-profile anti-slip rubber strips and mats with a high-bond self-adhesive backing for rapid installation on steps, ramps, thresholds, and equipment surfaces. Available in 25mm, 50mm, and 75mm widths as stair tread inserts, or as full-size mats for workbench surfaces and platform edges. No fixing tools required. Suitable for both indoor and outdoor use (specify EPDM grade for outdoor).
Anti-Slip Mats by Sector — UK Application Guide
Commercial Kitchens — Highest Priority Sector
Slips and falls are the most common accident type in UK commercial kitchens. The combination of water, oil, food waste, and cleaning chemicals creates extreme slip risk throughout service hours. HSG156 guidance specifically addresses commercial kitchen flooring — recommending R11-R12 anti-slip matting at all wet areas including in front of cooking equipment, at the dish wash, at food preparation sinks, and in walk-in refrigerator entrances. Open-grid drainage mats keep feet above liquid; anti-fatigue combination mats address both the slip and standing fatigue risks simultaneously.
Food Production and Processing
UK food production facilities operate under HSE and local authority inspection regimes that include flooring and slip risk assessment. Wet-process areas require R11-R12 rubber anti-slip mats in food-grade EPDM or food-approved nitrile rubber (EC 1935/2004 compliant). Open-grid mats are particularly important in wet wash-down areas and around CIP (clean-in-place) equipment.
Industrial and Manufacturing Workshops
Workshop floors contaminates with coolant, hydraulic fluid, and cutting oils require oil-resistant nitrile anti-slip mats — standard SBR rubber will swell and degrade in prolonged oil contact. Nitrile R11-R12 anti-slip mats maintain grip performance in oil-contaminated conditions, protecting workers in machining cells, assembly bays, and maintenance workshops.
Offices and Retail — Entrance and Wet Areas
Entrance matting is typically a building's highest slip-risk zone: tracked-in rainwater creates polished-floor slip hazards, particularly in UK autumn and winter. Anti-slip entrance mats — typically 3-stage systems (outdoor scraper, semi-internal rubber, internal textile barrier) — prevent the water reaching the interior floor. For offices and retail, R10-R11 rubber anti-slip mats at the outer entrance position, transitioning to barrier matting inside.
Swimming Pools and Wet Leisure
Pool surrounds and changing area floors rank among the highest slip-risk environments in the UK. Barefoot wet users on wet tile surfaces create conditions where even minor gradient can result in falls. Open-grid rubber anti-slip matting at pool surrounds and shower areas achieves R12 with barefoot PTV values well above HSE minimums, while the open construction keeps users elevated above pooling water.
UK Legislation and Anti-Slip Mats
Several UK regulations establish the legal duty to control slip risks:
- Workplace (Health, Safety and Welfare) Regulations 1992, Reg 12: Floors must be kept free from slip hazards. Anti-slip matting is a recognised compliance method.
- Health and Safety at Work etc. Act 1974: General duty of care — employers must take reasonably practicable steps to prevent workplace accidents including slips.
- Management of Health and Safety at Work Regulations 1999: Requires risk assessment of slip hazards and implementation of controls including anti-slip matting.
- Occupiers Liability Act 1984: Public-facing premises (retail, hospitality, healthcare) have a duty of care to visitors — inadequate anti-slip protection is a common basis for public liability claims.
Anti-Slip Mat Thickness Guide
| Thickness | Application | Notes |
|---|---|---|
| 3-6mm | Entrance mats, step inserts, desk/bench mats, overlays | Low-profile — minimal trip hazard at edges |
| 6-10mm | Commercial kitchens, workshops, wet rooms, ramps | Standard commercial thickness — good durability |
| 10-15mm | Anti-fatigue + anti-slip combination, heavy industrial | Ergonomic benefit from thickness — reduces standing fatigue |
| 15-20mm | Gym anti-slip, outdoor areas, equine applications | Heavy-duty spec — withstands forklift edge and heavy point loads |
Anti-Slip Mats — Price Guide 2026 (Inc. VAT)
| Product Type | Typical Specification | Price Guide |
|---|---|---|
| Anti-slip entrance mat (rubber) | 10mm ribbed EPDM, 600×900mm | From £22 |
| Anti-slip kitchen mat | Open-grid nitrile, 600×900mm | From £28 |
| Anti-slip matting roll (cut per m) | 6mm ribbed SBR, 1.25m wide | From £9/lin m |
| Anti-fatigue + anti-slip mat | 15mm cushioned, 600×900mm | From £38 |
| Outdoor anti-slip mat (EPDM) | 10mm studded EPDM, 600×900mm | From £28 |
| Self-adhesive stair tread | 3mm ribbed, 750×200mm per tread | From £8/tread |
All prices include VAT. Free UK delivery on all orders.
What Our Customers Say
Verified reviews from UK buyers
